UJF-3042 Series and UJF-6042 Printer Riser Kit

Mimaki’s UJF-3042 series and UJF-6042 digital printers are well known for their ability to print on a wide variety of substrates; however, the standard print height of 5.9” (150mm) is a limiting factor. Given our many years of experience in custom decoration, we have seen many substrates where it’s not plausible to digitally print directly on the part due to the print area falling outside the height restrictions of the printer.

With our riser kit, you can remove those physical limitations and transform your Mimaki UJF-3042 series or UJF-6042 digital printer into a super flexible workhorse machine capable of printing on countless materials without such severe height limitations.  Our riser kit enables a maximum print height of 12”; double the standard height of a Mimaki UJF-3042 series or UJF-6042 digital printer.

We accomplish this height by physically lifting the gantry of the printer and placing spacer adapters between the gantry and the base of the printer. This accommodates a greater print height while not sacrificing any of the strength of the build of the machine’s original construction. The riser kit includes three different length stand-offs to allow for manual fine-tuning and adjustment of the print bed height to accommodate substrates of variable heights.

We can send you the kit with instructions to install yourself or we can install the kit on your printer at our facility.

Included in Riser Kit

  • Lift brackets
  • Additional length tubing
  • All required connectors
  • Stand-offs
  • Waste ink tank adapter
  • Gantry extensions
  • Extension covers

 

Need Assistance?

Do you have questions regarding our printer lift kits? Call our Sales Department. Our sales team can answer all your questions regarding our lift kits including technical information or your custom requirements. We’re available to assist you Monday – Friday, 8AM – 5PM EST.

704-628-7679